Procrastination is Hoarding Eventual Work

I know hoarding physical items is not good.  Same is true hoarding things to do.

Hoarding work creates a backlog of work that still needs to be done.   It doesn't go away.   Wait long enough and the backlog become insurmountable. For example, delaying saving for retirement can be devastating if one starts in their 60s. LOL.

My solution is to break work into small chunks and lead to small wins.  For example, instead of sweating the final savings number for retirement, carve out much smaller monthly contribution and stick to it.  For example, saving $158.15 a month for 40 years will become $1 million.   I'm using the same principle on my home projects.   Instead of carving out a large amount of hours, I put 1-2 hours per day on a project, take a break, and start it up again the next day or even later in the week.  I did this with cleaning and staining our deck and I have been able to easily get the flooring cleaned and stained.  I'm now doing the same with the slatted walls.

Hopefully, this new strategy and approach will help me get projects done and give my kids a good head start on their retirement savings.  I think I will eventually get up to 4 hours a day on our home maintenance/improvement projects.  Almost like going back to work again.😎

For more on The Practice of Personal Finance, check back every Wednesday for a new segment.

This is not financial, saving, retirement nor home maintenance advice. Please consult a professional advisor.

Copyright © 2026 Achievement Catalyst, LLC

Pot Filler Leaking - An Annual Maintenance

We love having a pot filler on our counter top the stove.  It is so convenient to fill a pot with water while it is on the stove, instead of carrying the pot to the sink and back.   When remodeled our kitchen 5 years ago, we put a pot filler next to the stove.

It worked great for about a year.  Then, the pot filler started leaking at the post.   Turns out there are silicone o-rings that allow the pot filler to swivel.   As it turns out, the o-rings wear out about once a year for us and require replacement.  Fortunately, the pot filler manufacturer has a lifetime warranty on the items.   They will replace the o-rings at no cost to me.  I just have to install themselves myself.

Fortunately, I had the installer add a shut off valve for the pot filler, which means I can shut off the pot filler individually when it is leaking, instead of shutting off the whole house water.   There are 4 o-rings that need to be replaced.   It took me a couple hours the first time.  Nowadays,  I can do it in less than 30 minutes.   There are another set of o-rings on the swivel arm.  They last longer, needing change about every 2 years, which I've done 2 times.

When I bought the pot filler, I had no idea it needed such frequent maintenance.  I was surprised since plumbing fixtures, e.g. faucets, need maintenance infrequently, perhaps once every 5-10 years.

For more on Ideas You Can Use, check back every Tuesday  for a new segment.

This is not financial nor plumbing maintenance advice. Please consult a professional advisor.

Copyright © 2026 Achievement Catalyst, LLC

Missing Parts Magically Appearing

I try to leave parts in "known" places so that I remember to look there again.  Often, I can find parts that I have placed over 5 years ago.  Recently, I replaced tail lights in two vehicles from parts purchased (due to coming in pairs) over 5 years ago.  It has been a relatively good system.  Of course, it works until it doesn't.  Lately some parts aren't where I thought they would be. Sometimes, I can't find them for months.  

However, in the past couple weeks, some parts that have missing for almost year reappeared miraculously, in a place I didn't think I put things.   I have a few theories of how this happened.

1. Gremlins.  Yeah, they come around in the evening a surreptitiously move the items.  
2. Multi-verse.  OK, I'm moving between parallel universes that are similar, but not exactly the same.
3. Memory lapse.   Unfortunately, this is probably the reason.  I put things somewhere and don't remember where I put it.

Currently, very few parts are MIA.   I continue to hope that these missing parts will show up...eventually.

In the meantime, I will reduce the number of locations I use for storing miscellaneous parts.

For more on Reaping the Rewards, check back every  Friday for a new segment.

This is not financial, memory nor parts storage advice. Please consult a professional advisor.

Copyright © 2026 Achievement Catalyst, LLC

A Power Washer Is Must Have Tool for Me

One of my best tools is a power washer.   We have used it to clean our wood deck multiple times.  The power washer has also been useful on concrete (driveway and porch) , and brick (porch and veneer).  Finally, we also power wash our outdoor pots for our plants.

The best part is that we don't use any chemicals, just tap water.  Thus, there is no ecological issues with washing.

This is my second power washer, which I researched before buying.  The best advice I got was to buy one that had a kink resistant hose.   Kinking was an issue on the first power washer that I bought.

For more on Ideas You Can Use, check back every Tuesday for a new segment.

This is not financial, maintenance, nor do-it-yourself advice. Please consult a professional advisor.

Copyright © 2026 Achievement Catalyst, LLC

Brush Reuse Hack for Several Days Painting

In the past, when painting over several days, I would clean up the paint brush with soap and water every day.  The next day, I would use the slightly damp brush.  

I learned a hack for reusing a brush from watching painters do our indoor rooms last time.   At the end of the day, the painter wrapped the brush in a damp paper towel and put the brush in a ziploc bag.  The next day, the painter took out the brush, unwrapped the paper towel and used the brush.  After finishing the job, the brush was cleaned with soap and water.

I've done this a few times now.  It works well and I can use the brush over a couple week project without cleaning it before I'm finished. Big effort and time saver.  

For more on Ideas You Can Use, check back every Tuesday for a new segment.

This is not financial nor painting advice. Please consult a professional advisor.

Copyright © 2026 Achievement Catalyst, LLC

Cleaning and Staining the Wood Deck

We have a treated wood deck in the back.  We do the power wash cleaning and staining ourselves.  In the past, I power washed the entire deck first over several days, due to clearing furniture and plants from one section to another.  Then I stained over several days due to moving furniture and plants to finished sections and allowing that section to be stained.  Since the deck is built from 2X4 treated wood with 3/8 inch gaps, it's acceptable to stain a section over different days since no overlap can be seen.

This year, I decided to clean and stain a section (about 10-15%) at a time.  It was satisfying cleaning and staining in this manner since a section would be finished and looking good, instead of waiting for completion.  Also, it enabled me to go over and touch up the power washing easier, since I often need 2-3 passes to ensure no spots are missed. Finally, I am able to work in 1-3 hour segments, which allows me to schedule into a few hours gap during the day instead allotting the whole day.

I am almost finished and everything looks great so far.  Only one or two more sections to go, depending on how much time I have to do a section.

For more on Strategies and Plans, check back every Monday for a new segment.

This is not financial, deck maintenance nor do-it-yourself advice. Please consult a professional advisor.

Copyright © 2026 Achievement Catalyst, LLC

A Car Feature I Would Rather Not Have

My first car was basic.  Radio, single strap seat belts, manual windows, manual mirrors and cigarette lighter.  No A/C nor airbags. The only amenity was automatic transmission. 

There has been a lot of amenity creep since my first car.  Electric windows, electric mirrors, ABS brakes, cruise control,  air bags, CD players, blue tooth, which we have in our newest 2012 car.   While I don't really "need" some of these, I am willing to have then.   We still don't have GPS nor car cameras.

However, one feature we have that I view as unnecessary, because of the cost to replace when it stops work.  That feature is the pressure monitor for tires.  Recently, the warning light went on for low tire pressure.  I checked all four tires and they were at target pressures.   It turns out the battery for one sensor had gone dead.  Cost to replace at the dealer?   $260 for one or $740 for all four, since all are likely to fail soon also.  Huh?  That's almost the coast of replacing 4 tires with top of the line tires.

In all my years of driving, I only had couple times that a tire pressure sensor would have been helpful.  In one case, I drove a couple miles with a flat tire that occurred at my home.  In another case, I had a flat tire in a parking lot and called AAA to change the time, which took about an hour of wait time. Otherwise, I generally have slow leaks due to a nail and I discovered the issue way before it is flat.   

My only other direct experience with a tire pressure sensor was on a rental car that flashed a warning when we drove to a mountain top in Hawaii.  The cold temperatures caused the tire pressure to go down, but the sensor didn't go off immediately when we got back to sea level.  In this instance, it showed which tires were low.  Quite annoying for a few days since we didn't have easy access to capability to put air in the tire.

If I could eliminate this feature on our next new car purchase, I would.  For reference, I did find a less expensive replacement option: Costco will replace the sensor batteries for about $60 dollars a tire and they don't charge for the initial inspection.

Disclosure: I was not compensated by Costco for this post.

For more on Crossing Generations check back every Thursday for a new segment.

This is not financial nor car amenity advice. Please consult a professional advisor.

Copyright © 2026 Achievement Catalyst, LLC

Prepping Snow Blower for Summer Storage

Although we still have frost warnings, I don't expect any more snow storms.  We got good use out of our snow blower, which we inherited from my in-laws.   We had several storms that ranged from a couple inches to a foot on our driveway.

When we inherited the snow blower, it had not be used for 7 years, since my father-in-law had passed way.  It did not start up.  I asked a neighbor whose hobby is restoring cars for some carburetor cleaner.  Instead, he took apart the carburetor, cleaned it and put it back together, without any instructions.  It started up right away.  

Now that Spring is here, it's time to "summerize" the snow blower so that I won't have the problem again and it will easily start up the next winter.   First, I always turn off the fuel and let it run until it stops.  That way no gas is remaining the carburetor which will gunk up when the gas evaporates.  Next, empty all the gas in the in the tank.   That's about all I do.   I change the oil every couple years at the beginning of winter.

This process has worked well since the snow blower starts up every winter right away.

For more on Ideas You Can Use, check back every  Tuesday for a new segment.

This is not financial nor maintenance advice. Please consult a professional advisor.

Copyright © 2026 Achievement Catalyst, LLC

Accidental DIY Repair Success

I pride myself on being able to do minor repairs and fixes.   Most of the time, I am successful.  It usually take longer than hiring someone, but it definitely is much less expensive.    Sometimes, I am unable to fix initially. The fix isn't done for a while, which upsets my spouse and I put more effort on it.  Then sometimes I luck out and get an accidental fix.  

The following two accidental fixes happened recently.

• Several years ago, one of the whole house speakers stopped working in the kitchen.  I did a lot of trouble shooting to determine the problem.  I switch the speaker lines and the other one stopped working.   I switched out the volume control with no effect.  I undid and reconnected all the speaker wires with no change.  I concluded that one the wires must have gone bad and decided to live with it.
  
  Fast forward to mid last year.    We purchased a new modern entertainment stand to replace our armoire entertainment cabinet.  I wasn't looking forward to moving the stereo equipment from the old armoire cabinet to the new entertainment stand since it involved reconnecting over 20 wires to the equipment.   After much delay, I spend a day reconnecting the wires which I had previously marked.  Some of the wires had become detached and I needed to reattach them.  One of the detached wires was for the kitchen speakers.  After reattaching the kitchen speaker wires:  Surprise both speakers worked.   I've continued playing the kitchen speakers and both continue work.   
  
  I could swear that I had checked the connection on the speaker wire several years ago.  But I guess I didn't retighten them correct.     Anyway, I'm still claiming a belated DIY success.
  
  
• A few months ago, my son showed be a brown residue around his bathroom.   I figured he was just messy and wiped it away.   However, the next week it appeared again.  This time I suspected faucet body might be defective.
  
  Since the faucet has a lifetime warranty, I decided to take it apart and submit a warranty request. Since it has been a few years since it was installed, I retrieved the installation instructions to use for the dismantling.  It was a tight space under sink and it took a while loosen it. Further dismantling was going to take a while.  Unfortunately, the next day, my son was having a friend over for a playdate.  So I reassemble everything, tightened all the nuts and turned the water back one, and wait for the residue to occur again.
  
  That was months ago and no residue returned.  Tightening all the nuts was the solution.   Another accidental successful DIY repair.

Yeah, I was lucky both times.  However, lesson learned: make sure all nuts and screws are tight first in the future.

For more on Reaping the Rewards, check back every Friday for a new segment.

This is not financial nor do-it-yourself advice. Please consult a professional advisor.

Copyright © 2026 Achievement Catalyst, LLC

Repairing Instead of Replacing Windows

Our 35 year old windows are original and solid wood.   The sashes are in still good shape, no rot.  However, some of the sills and nose had warped.   In addition, the windows were slightly askew when opening and when closed.

We got an estimate on replacing all the windows with aluminum clad wood windows and composite doors.   The estimate was only for replacing the window sashes and liner, but not the window frame, which results in a slightly smaller window opening.  The cost was expensive, about 15% of the purchase price of the house.

To be honest, I really like the feel of solid wood windows.  My first house was 100 years old with original windows. the ones with counter weights and ropes.

Instead we worked with three different business (two of them sole proprietorships):  one repaired window sills, one repaired sashes and window glass in the doors, and one that repair the mechanisms.   Total cost 5% of replacing windows and doors or 0.75% of the cost of the house.

At 1/20 the cost of replacing windows, we decided to do the repairs option.  The repairs have been completed and we are very satisfied.  Admittedly, it took more effort to find the craftsmen that did the work, which I did through referral.  But it was worth it, for both the quality and savings.

For more on Ideas You Can Use , check back every Tuesday for a new segment.

This is not financial nor maintenance advice. Please consult a professional advisor.

Copyright © 2025 Achievement Catalyst, LLC